PowMr 60A MPPT Solar Charge Controller for 12V, 24V, 36V, 48V Systems

The POW-M60-MAX is a powerful 60A MPPT solar charge controller that offers a wide range of voltage and power support. When used with a 12V battery, the controller can accept a PV input voltage ranging from DC20V to DC80V, with an input power of up to 720W. For 24V battery systems, the input voltage range is DC37V to DC105V, supporting up to 1440W of input power. When connected to a 36V battery, the input voltage can be between DC50V and DC160V, with a maximum input power of 2160W. Finally, for 48V battery systems, the input voltage range is DC72V to DC160V, allowing for up to 2880W of input power.

The package includes the PowMr Solar Controller, a pair of 10AWG red and black solar cables, a pair of 10AWG red and black battery cables, and a pair of red and black ADs terminals. The controller features a plug-and-play design, making installation and setup straightforward.

The wiring diagram provided with the controller specifies that a 2P-8A circuit breaker should be used, and recommends using M5 screws for the installation. It's important to note that the inverter should not be connected to the load side of the controller, as this could potentially cause irreversible damage to the device.

The installation process is simple: always connect the battery before connecting the solar panel, and disconnect in reverse order. This ensures the safe operation of the system.

The POW-M60-MAX charge controller is compatible with a variety of 12/24/36/48V batteries, including lead-acid and lithium-ion batteries. The user can customize the charging parameters to suit their specific battery type. The controller utilizes a 4-stage battery charging algorithm (Bulk Charge, Boost Charge, Float Charge, and Equalization) to ensure rapid, efficient, and safe charging.

Equipped with a 0-layer LCD screen, the controller can display the status of the PV input voltage/power, battery voltage, charging current, and charging power. The buttons on the controller allow the user to easily change the battery type as needed. This user-friendly interface makes it simple to monitor the controller's working state and process.

The POW-M60-MAX features a maximum power point tracking (MPPT) technology with a tracking efficiency of not less than 99% and a peak conversion efficiency of up to 97%. This ensures that the controller can continuously track the array's maximum power point, providing the maximum amount of power to charge the battery.

Constructed with die-cast aluminum, the controller offers excellent heat dissipation, reducing power loss. Additionally, the multiple built-in protections, including Reverse Connection, Overcurrent, Short-circuit, and Over-temperature, ensure the safety and reliability of the solar charge controller.

product information: