Solar Charge Controller with LCD Display, 30A MPPT, Dual USB, Multiple Load Control Modes

The new MPPT solar charge controller offers a range of features and capabilities to optimize solar energy management. Let's explore the key product details and address common questions:

Product Questions: 1. Q: How much solar panel wattage can this controller handle? A: The controller supports 30A up to 360W, 40A up to 480W, 50A up to 600W, and 60A up to 720W.

1. Q: Does this controller work with lithium batteries? A: Yes, the new controller is compatible with both lead-acid and lithium batteries. When using lithium batteries, you'll need to set the charging parameters per the manual.

2. Q: Can I charge a 12V battery with a 36V 200W solar panel? A: To charge a 12V battery, the solar panel voltage should be between 17V and 23V. For a 24V battery, the solar panel voltage should be between 36V and 46V. Ensure the voltage is within these ranges to avoid damaging the controller.

3. Q: Can I connect an inverter to the load side of the controller? A: No, please connect the inverter directly to the battery, not to the load terminals of the controller.

4. Q: Does the controller have any battery capacity requirements? A: No specific requirements, but the battery capacity should match the solar panel current. For example, a 5A solar panel is best paired with a 50Ah battery, and a 10A panel with a 100Ah battery. Avoid pairing a high-capacity panel with a small battery.

5. Q: How should I connect the solar panels, batteries, and controller? A: Always connect the battery first to ensure it is fully charged, then connect the solar panel. When disconnecting, remove the solar panel first, then the battery, in that order, to prevent damage.

The controller features an LCD display that provides real-time monitoring and status updates. When connecting the system, the controller will automatically detect the voltage.

Installation and Usage Instructions: 1. Install the controller in a well-ventilated location, away from direct sunlight and high temperatures. Do not expose it to water. 2. Use the appropriate M4 or M5 screws, with a nut diameter less than 10mm, to mount the controller on a wall or platform. 3. Leave enough space around the controller for cooling and easy access. 4. The mounting hole distance is 98 x 178mm, with 5mm diameter holes. 5. Ensure all terminals are tightly connected during installation.

The MPPT technology in this solar controller is designed to detect the maximum charging current, not the automatic voltage adjustment or boost type. Please refer to the user manual for detailed configuration instructions.

Available Products: - PWM 20A Solar Charge Controller - PWM 30A Solar Charge Controller - 300W Solar Charge Controller - MPPT 30A Solar Charge Controller - MPPT 60A Solar Charge Controller - MPPT 100A Solar Charge Controller

Customer reviews for these products range from 3.3 to 4.1 out of 5 stars, reflecting their performance and reliability. Prices start at $9.99 and go up to $31.99, depending on the model and features.

product information: